Connecting Ethernet
Note: These are Dell gateway instructions. For Advantech instructions, see Connecting Ethernet (Advantech).
During initial setup, Wi-Fi is for laptop communication with the gateway. The wired Ethernet Internet connection is for Cloud communication and updates.
Before connecting Ethernet, ensure that:
-
The Internet connection that you will make to the gateway is live so that the gateway's Wi-Fi will work.
-
The (Internet) network connection has a DHCP (Dynamic Host Configuration Protocol) server to get an address.
-
The PC being used for setup is set to have a dynamic IP address rather than a static address.
On the side of the gateway, remove the plastic cover from Ethernet Port 1 (not Port 2) and plug in a network Ethernet patch cable that provides Internet access (and optional POE).
Note: For more information on PoE, see Connecting Power with PoE (Power over Ethernet) in Connecting Power.
Continue to Connecting Power.