Adding the Service

Adding the Module (.jar) Files to Workbench

  1. Copy the KMC Commander Gateway Service .jar files (kmcCommanderGateway-rt.jar and kmcCommanderGateway-wb.jar) to the Niagara 4 modules folder at the following location:

    C:\<VendorName>\<WorkbenchVersion>\modules

  2. Restart Workbench.

Continue with the topic Transferring the Module (.jar) Files to a JACE.

Transferring the Module (.jar) Files to a JACE

Perform these steps after adding the mule (.jar) files to Workbench:

  1. In Workbench, locate the JACE controller in the Nav tree.

  2. Connect to the JACE Platform.

  3. In the JACE platform, double-click Software Manager.

  4. In the File list, press and hold CTRL while clicking each of the following files:

    • kmcCommanderGateway-rt.jar

    • kmcCommanderGateway-wb.jar

  5. Click Install.

    Note: If upgrading, click Upgrade.

  6. Click Commit.

  7. Restart Workbench.

Continue with the topic Verifying Module Presence.

Verifying Module Presence

Perform the following steps after the modules have been transferred to the JACE to verify the module certificate validity.

Note: Refer to the Tridium document docModuleSign.pdf for details.

  1. Connect to the JACE platform.

  2. Expand the platform and locate the Software Manager.

  3. Double-click Software Manager.

  4. In the module list, locate the following modules:

    • kmcCommanderGateway-rt.jar

    • kmcCommanderGateway-wb.jar

  5. Note which of the following icons are present in the Installed and Avail. columns:

  • A green shield indicates a valid certificate is present.

  • A question mark indicates that a JACE reboot is required. To reboot the JACE, click Reboot in the Application Director view of the JACE's platform.

    Note: A JACE reboot is different than a JACE restart.

Continue with the topic Adding the Service to a Station.

Adding the Service to a Station

To add the KMC Commander Gateway Service to a JACE station, do the following:

  1. In the Workbench Nav tree, locate and connect to the JACE Platform and Station.

  2. Open a Palette side bar.

    Note: Click Side Bars , then select Palette from the dropdown menu.

  3. In the Palette side bar, click Open Palette .

  4. From the Open Palette window, in the Module column, locate then select kmcCommanderGateway.

    Note: To narrow the list, type kmc in the filter.

  5. Click OK. KMC Commander Gateway Service appears in the module's Palette.

  6. Drag the KMC Commander Gateway Service from the module's Palette and drop it on the Services node of the JACE station's database.

  7. In the Name window that appears, leave the name as is, or edit the name as appropriate.

  8. Click OK. The service appears in Services.