Restarting the Gateway
The KMC Commander IoT gateway can be restarted either remotely or locally by doing one of the following procedures:
-
In Settings > Project > Gateway Information, select Reboot Gateway. (See Gateway Information.)
Note: The gateway must have a Cloud connection to perform a remote reboot.
-
Press the power reset button (Advantech only) off and on.
-
Connect to the gateway with PuTTy or equivalent terminal software, using its SSH credentials, and at the ~$ prompt, enter sudo reboot. (See Configuring SSH Settings.)
-
Temporarily disconnect power to the gateway. For details, see Connecting Power (Advantech) or Connecting Power (Dell).
After restoring power, allow at least three minutes for the gateway to fully reboot. Then log back into the gateway.