Configuring IP Tables

For increased security, you can only configure these settings when logged into the gateway locally. See Logging In at the Job Site.

The IP Tables list is a master override whitelist of the LAN/WAN lists for Cloud connectivity.

Caution: Deleting any of the default listings is not recommended. Deleting the wrong listing could result in loss of communication with the gateway.

For an overview, watch the video below (until the 3:09 mark). For details, consult the following written information.

Adding to IP Tables

1. Go to Settings , then IP Tables.

2. In IP Address, TCP Ports, and/or UDP Ports, enter the relevant IP address and connected ports as needed.

   Note: Enter an address or a range with the range defined with the subnet mask length using CIDR (Classless Inter-Domain Routing) notation. (For example, enter the base address, followed by a slash, and then the subnet mask length as the number of most significant bits of the IP address, such as 192.168.0.0/16.)

3. Select Save.