On-Site Installation
Do you find this article helpful? Help us improve by sharing feedback: Give Feedback
Before Installation
Before configuring KMC Commander on site, all networking should be complete with all controllers and other devices fully installed and online. All network and Internet communication issues in a building should be resolved before installing KMC Commander.
Use only approved (included) antennas. Non-approved antennas may produce spurious or excessive RF transmitting power, which may lead to a violation of FCC/IC limits. The product shall be installed at a location where the radiating antenna is kept 8 inches (or 20 cm) from nearby persons in its normal operation condition in order to meet regulatory RF exposure requirements.
(Optionally) Installing the Wi-Fi Antenna
(Optionally) Installing the Antennas Remotely
Connecting Networks and Power On Site
We value your feedback!
Help us improve this article: Click here to take a 3-minute survey. Your input helps us make our articles clearer and more useful.