On-Site Installation
Do you find this article helpful? Help us improve by sharing feedback: Give Feedback
Video Overview
For an overview, watch the video below. For details, consult the following written information and linked subsections.
Before configuring KMC Commander on-site, all networking should be complete with all controllers and other devices fully installed and online. All network and Internet communication issues in a building should be resolved before installing KMC Commander.
Use only approved (included) antennas. Non-approved antennas may produce spurious or excessive RF transmitting power, which may lead to a violation of FCC/IC limits. The product shall be installed at a location where the radiating antenna is kept 8 inches (or 20 cm) from nearby persons in its normal operation condition in order to meet regulatory RF exposure requirements.
(Optionally) Installing the Wi-Fi Antenna
(Optionally) Installing the Antennas Remotely
Connecting Networks and Power On Site
We value your feedback!
Help us improve this article: Click here to take a 3-minute survey. Your input helps us make our articles clearer and more useful.